For these little jigs, I use either 1/8" or 5/32" eyes. These eyes are self-sticking, but it's only good for positioning them on the jig head. They will need a coat of epoxy. If you have not invested in the UV Epoxy yet with the UV flashlight, I strongly encourage to try it. It make life so much easier to have the epoxy dri in 5 seconds with the UV light. I buy the eyes from Janns Netcraft as they are about as cheap as I can find them. Here's a link to the eyes at netcraft

I get the jig heads from a number of places. If you can only find the round head jigs in the 1/124 oz size, just take a pair of flat needle nose pliers and flatten the head to make a nice flat surface for the eyes to stick to. You will find the metallic Embroidery yarn at Michaels, Hobby Lobby, JoAnns Fabrics etc. Great stuff with lots of uses.

Feel free to contact me if you have any questions at all.